DIY Envelope Using WeR Memory Keepers Envelope Punch Board

20150601_102838

Today I am going to show you how to use WeR Memory Keepers Envelope Punch Board to make a custom sized envelope to fit a standard card size of 4.25″ by 5.5″ card. This card size is a quarter inch narrower than the A2 card size shown on the punch board.

This is how the envelope punch board looks like:
20150601_101934

Supplies you will need to make the envelope:
1. Envelope punch board
2. 8″ by 8″ paper
3. Adhesive

Step 1:
Align left edge of the paper to the score line measurement at 3.5″. Punch and score.
20150601_102044

Step 2:
Rotate paper 90 degree counter clockwise. Align score mark with score guide.  Punch and score. Repeat for all 4 corners.
20150601_102118

Step 3:
Round corners with reverse punch.
20150601_102211

Step 4:
Crease the scored lines and glue with your preferred adhesive.
20150601_102319 20150601_102400

Tip:
I like to tuck the pointed flap behind the envelope as shown on the picture on the top. 🙂

This envelope punch board can be used to make envelope for card size from 2″ by 3.5″ to 6″ by 8.5″.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s